|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Super-luminosity LED Lamp/High-luminosity LED Lamp GL3tt8 series GL3uu8 series s Outline Dimensions Colored diffusion Protruded resin 0.8MAX o3.8 o3.0 o3mm(T-1), Cylinder Type, Colored Diffusion, High-luminosity LED Lamps for Indicator (Unit : mm) s Radiation Diagram (Ta=25C) -30 -20 -10 0100 +10 +20 +30 +40 4.4 5.0 -40 Relative luminous intensity(%) 0.5 0.250.5 -0.25 (Tie-bar cut) 10.4 80 +50 60 -50 (1.0) -60 +60 40 +70 20 0.5 0.1 25.0MIN -70 -80 +80 (1.0) -90 0 +90 0.50.1 1.7 2.54NOM 1 2 (Dimension from the center of o3mm) Pin connections 1 Anode 2 Cathode Unspecified tolerance:0.2 s Absolute Maximum Ratings Model No. Radiation color Radiation material GL3UR8 GL3TR8 GL3HJ8 GL3HV8 Red(Super-luminosity) GaA1As on GaA1As Red(High-luminosity) GaA1As on GaAs Orange(Super-luminosity) A1GaInP Yellow(Super-luminosity) A1GaInP Power dissipation Forward current Peak forward current P IF IFM (mW) (mA) (mA) 75 110 130 130 30 50 50 50 50*1 300*2 100*1 100*1 (Ta=25C) Derating factor Reverse voltage Operating temperature Storage temperature Soldering temperature (mA/C) VR Topr Tstg Tsol*3 (V) (C) (C) (C) DC Pulse 0.40 0.67 0.67 0.67 0.67 4.00 1.33 1.33 4 5 4.1 4.1 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +100 -25 to +100 -25 to +100 -25 to +100 260 260 260 260 *1 Duty ratio=1/10, Pulse width=0.1ms *2 Duty ratio=1/16, Pulse width1ms *3 5s or less(At the position of 1.6mm or more from the bottom face of resin package) s Electro-optical Characteristics Forward voltage VF(V) TYP 1.85 1.75 1.9 1.9 MAX 2.5 2.2 2.6 2.6 Peak emission wavelength IF p(nm) (mA) TYP 660 660 620 590 20 20 20 20 Luminous intensity IF IV(mcd) (mA) TYP 300 60 800 350 20 20 20 20 Spectrum radiation bandwidth IF (nm) (mA) TYP 20 20 18 13 20 20 20 20 Reverse current VR IR(A) (V) MAX 100 10 100 100 3 4 4 4 Terminal capacitance Ct(pF) TYP 25 30 26 24 (Ta=25C) Page for characteristics (MHZ) diagrams 1 1 1 1 Lens type Model No. GL3UR8 Colored GL3TR8 diffusion GL3HJ8 GL3HV8 In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 19 LED Lamp UR series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) 40 Forward current IF(mA) 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(C) Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25C) Duty Ratio vs. Peak Forward Current (Ta=25C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(C) Forward current IF(mA) Duty ratio DR TR series Forward Current Derating Curve 70 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 Relative luminous intensity(%) (1F=20mA) 60 Forward current IF(mA) Forward current IF(mA) 50 20 10 5 3 2 200 40 100 50 30 20 10 0 -20 0 20 40 60 80 85 100 Ambient temperature Ta(C) 1 0.5 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 Forward voltage VF(V) 20 10 -20 0 20 40 60 80 100 Ambient temperature Ta(C) Peak Forward Current Derating Curve 700 Luminous Intensity vs. Forward Current(Note) 500 (Ta=25C) Duty Ratio vs. Peak Forward Current 500 (Ta=25C) 600 Relative luminous intensity(%) Peak forward current IFM(mA) 200 Peak forward current IF(mA) 0.2 1 2 5 10 20 50 100 50 200 100 50 30 500 400 20 10 5 300 10 5 200 100 2 0 -20 0 20 40 60 80 100 Ambient temperature Ta(C) 1 0.1 0.5 2 1 1/50 1/20 1/10 1/5 1/2 1 Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) devices catalogs, data books, etc. Contact SHARP 6 (Internet) Data forshown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. sharp's internet.(Address http://www.sharp.co.jp/ecg/) (Notice) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP LED Lamp HV series Characteristics Diagrams Forward Current Derating Curve 70 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 Relative luminous intensity(%) (1F=20mA) 60 Forward current IF(mA) Forward current IF(mA) 50 20 10 5 200 40 100 50 30 20 2 10 0 -20 0 20 40 60 80 85 100 Ambient temperature Ta(C) 1 0.5 1.0 20 10 1.2 1.4 1.6 1.8 2.0 2.2 2.4 -20 0 20 40 60 80 100 Forward voltage VF(V) Ambient temperature Ta(C) Peak Forward Current Derating Curve 140 Luminous Intensity vs. Forward Current(Note) 500 (Ta=25C) Duty Ratio vs. Peak Forward Current 500 (Ta=25C) 120 Relative luminous intensity(%) Peak forward current IFM(mA) 200 Peak forward current IF(mA) 0.2 1 2 5 10 20 50 100 50 200 100 50 100 80 20 10 5 20 10 5 60 40 20 2 0 -20 0 20 40 60 80 85 100 Ambient temperature Ta(C) 1 0.1 0.5 2 1 1/50 1/20 1/10 1/5 1/2 1 Forward current IF(mA) Duty ratio DR HJ series Forward Current Derating Curve 70 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 Relative luminous intensity(%) (1F=20mA) 60 Forward current IF(mA) Forward current IF(mA) 50 20 10 5 3 2 200 40 100 50 30 20 10 0 -20 0 20 40 60 80 85 100 Ambient temperature Ta(C) 1 0.5 1.0 20 10 1.2 1.4 1.6 1.8 2.0 2.2 2.4 -20 0 20 40 60 80 100 Forward voltage VF(V) Ambient temperature Ta(C) Peak Forward Current Derating Curve 140 Luminous Intensity vs. Forward Current(Note) 500 (Ta=25C) Duty Ratio vs. Peak Forward Current 500 (Ta=25C) 120 Relative luminous intensity(%) Peak forward current IFM(mA) 200 Peak forward current IF(mA) 0.2 1 2 5 10 20 50 100 50 200 100 50 100 80 20 10 5 20 10 5 60 40 20 2 0 -20 0 20 40 60 80 85 100 Ambient temperature Ta(C) 1 0.1 0.5 2 1 1/50 1/20 1/10 1/5 1/2 1 Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 11 |
Price & Availability of GL3HJ8 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |